Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] 

FLINT Oszillator

Femtosekunden-Oszillator FLINT

flint 1

Die serienmäßige Repetitionsrate ist 76MHz (64 - 84MHz optional). Die Ausgangsleistung (bis zu 6W) wird durch eine "Power Lock" Stromregelung stabilisiert. Die spektrale Bandbreite (FWHM) liegt modellabhängig zwischen (10-30)nm und ermöglicht Pulsdauern von (60 -100)fs. Der FLINT Oszillator kann optional mit variabler Resonatorlänge (zur Synchronisation), sowie mit einer CEP-Stabilisierung ausgestattet werden.


Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Bilder
Tab 1


  • First choice for seeding Yb based ultrashort pulse amplifiers
  • Excellent pulse contrast due the high nonlinearity inherent for optical Kerr effect
  • Extremely high output power in the range of few watts (standard pulse energy up to 75 nJ at 76 MHz)
  • Ideal source for broadband terahertz generation
  • Spectrum bandwidth broad enough for seeding simultaneously Yb and Nd based laser sources in OPCPA systems
  • Optional CEP stabilization
  • Possibility to lock output pulse phase to external clock
  • Sub-100 fs pulses directly from the cavity of the laser without any additional external pulse compressors
  • Output power up to 6 W


  • Seeding Yb/Nd based ultrashort pulse laser amplifiers
  • THz generation
  • Two-photon polymerization
  • Non-linear microscopy
  • Seeding CEP stabilized laser sources
  • Pumping of femtosecond OPO


Oscillator module is machined from a single monolithic aluminium block which is being cooled by water to ensure stable and robust operation. The housing of oscillator has two separate sections: cavity section and pump module section on the opposite side. Detector module, which includes a photodiode for oscillator power monitoring, is attached to the front side. The oscillator is contained in the external casing in order to reduce the impact of the environmental temperature on the performance. The special design of external casing includes three point kinematic mounts which are used to support oscillator preventing any mechanical stress caused by difference of thermal expansion between optical table and laser housing.

FLINT oscillator can be equipped with optional, wavelength converter (HIRO) providing harmonics radiation at 517 nm, 345 nm and 258 nm wavelengths.

Tab 2

  FLINT 1.0 FLINT 2.0 FLINT 4.0 FLINT 6.0
Max. average power >1 W >2 W >4 W >6 W
Pulse duration
(assuming Gaussian pulse shape)
     <80 fs
 <100 fs
Pulse energy >12 nJ > 25 nJ > 50 nJ > 75 nJ
Repetition rate 76 +/- 0.5 MHz1)
Centre wavelength 1035 +/- 10 nm2)
Output pulse stability <0.5 % rms over 24 hours3)
Polarization Linear, horizontal 
Beam pointing stability <10 µrad/ºC 
Beam quality TEM00, M2 < 1.2 
Beam divergence 1.1 x diffraction limited (of TEM00, M2 < 1.2) 

1) Other repetition rates are available in the range from 64 MHz to 84 MHz
2) The center wavelength can be specified with tolerance +/- 2 nm for customized oscillators.
3) With power lock on.

High output power models (up to 6 W) are available for customized oscillators.

Oscillator can be equipped with optional wavelength converter (HIRO)

Generated harmonics SH TH FH
Output wavelength 517 nm 345 nm 258 nm
Conversion efficiency >30 % >5 % >1 %



Tab 3

Tab 3 Inhalt

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
Beschreibung 1
Bild 2
 flint dimensions
Beschreibung 2
Bild 3
 flint spectrum
Beschreibung 3
 Typical spectrum of FLINT
Bild 4
 flint timing jitter
Beschreibung 4
 Timing jitter between oscillator pulse and external clock signal
Bild 5
 flint cep
Beschreibung 5
 CEP stabilization
Bild 6
Beschreibung 6
Bild 7
Beschreibung 7
Bild 8
Beschreibung 8
Bild 9
Beschreibung 9
Bild 10
Beschreibung 10