Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] topag.de 

Q1-100 Serie

5931
Q1-100 - Serie, gütegeschalteter Nd:YAG Laser, Dioden-gepumpt

Q1 100

Die rein luftgekühlten Laser der Q1-100 Serie liefern bis zu 25mJ bei einer Pulslänge <10ns. Der gütegeschaltete Nd:YAG Laser deckt breite Anwendungsbereiche ab, bei denen hohe Pulsenergien benötigt werden.  Folglich ist er der ideale Laser für Laserinduzierte Plasmaspektroskopie, Flugzeitmassenspektrometrie und Laserstrahlverdapfen. Es sind Versionen mit 50 und 100Hz lieferbar.

Status-mail-unread-icon

Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Bilder
Tab 1

Features

  • Up to 25mJ pulse energy at 1064nm
  • Air cooled (no water)
  • 50 or 100Hz repetition rate
  • Built-in sync pulse generator for triggering of user equipment
  • Remote control via built-in Ethernet or Wi-Fi interface
  • Optional 2nd, 3rd, 4th or 5th harmonic generators
  • Optional attenuator for fundamental, second, third harmonic
  • Optional fiber coupled output
  • Guaranteed > 1 Gshot lifetime

Applications

  • Light Induced Breakdown Spectroscopy (LIBS)
  • LCD repair
  • Laser ablation
  • Time-of-Flight Spectroscopy (TOFS)
  • Light Induced Fluorescence (LIF) Spectroscopy
  • Flash photolysis
  • Matrix Assisted Laser Desorption/Ionization (MALDI)
  • Pulsed Light Deposition (PLD)
  • Light Detection And Ranging (LIDAR)
  • Remote sensing
  • Particle Image Velocimetry (PIV)

The new Quantas Q1-100 series diode pumped, fully air-cooled, Q-switched laser is designed for a wide range of applications that require high peak power pulses. Due to good thermal properties of the Nd:YAG crystal laser, it delivers up to 25 mJ at 100 Hz repetition rate. This laser is an ideal tool for applications like Light Induced Breakdown Spectroscopy (LIBS), LCD repair, semiconductor failure analysis, laser ablation, remote sensing and many others.

Less than 10 ns pulse duration allows efficient fundamental wavelength conversion to higher harmonics with 213nm as shortest wavelength available. Wavelength extension into the infrared range by use of OPO is available by request.

TEC based cooling eliminates risks associated with water cooling (like leaks, circuit shortening etc.). Furthermore, it reduces running costs as no maintenance is required. Low jitter triggering pulses for user equipment are available with up to 300 μs lead in internal triggering mode. If required, laser pulsing can be externally triggered from a delay generator. The laser can be controlled via built-in Ethernet port trough a web‑server. There exists the option to add a Wi-Fi adapter. It allows users to monitor and control the laser remotely.

Tab 2
Specifications 1)

Quantas-1064Q1A-50Q1A-100Q1B-100Q1C-100Q1D-100
Wavelength 1064 nm
Pulse energy 5 mJ 2.5 mJ 8 mJ 15 mJ 25 mJ
Typical pulse duration2) < 10 ns
Pulse to pulse energy stability3) < 0.5 % RMS 
Power drift4) ± 3.0 % 
Pulse repetition rate5) 50 Hz 100 Hz5)
Beam profile bell-shaped, > 75 % fit to Gaussian
Beam divergence6) < 1.2 mrad
Polarization linear, horizontal at 1064 nm
Typical beam diameter7) 2.5 mm
Jitter8) < 0.5 ns RMS
Optional Harmonics Generator Module9)
532 nm 2.5 mJ 1.25 mJ 4 mJ 7.5 mJ 12.5 mJ
355 nm 1.25 mJ 0.6 mJ 2 mJ 5 mJ 6 mJ
266 nm 0.6 mJ 0.3 mJ 1.5 mJ 2.5 mJ 3 mJ
213 nm 0.2 mJ 0.06 mJ 0.5 mJ 1 mJ 1.5 mJ
Optional Attenuator10)
Wavelength 1064 nm, 532 nm, 355 nm
Attenuation range 5-95 %
Optional Fiber Coupled Output11)
Wavelength 1064 nm or 532 nm
Max input pulse energy up to 25 mJ12)
Dimensions
Laser head (WxLxH) 160 x 230 x 141 mm3
Harmonics generator module (WxLxH) 113 x 242 x 112 mm3
Controller unit (WxLxH) 160 x 70x 140 mm3
Power adapter, typical (WxLxH) 80 x 120 x 60 mm3
Operating Requirements
Cooling requirements air cooled (no any water)
Ambient temperature 15 - 30 °C
Relative humidity 10 - 80 % (non-condensing)
Mains voltage 90 - 230 V AC, single phase, 47 - 63 Hz13)
Power consumption < 50 W < 100 W < 150 W

1)Due to continuous improvements all specifications are subject to change. Unless stated otherwise all specifications are measured at 1064 nm and 100 Hz pulse repetition rate.

2)FWHM level at 1064 nm. Shorter pulse duration is available by request. Please inquire for detailed specifications.

3)Averaged from 30 second time interval.

4)Over 8 hour period after 20 minutes of warm-up time, when ambient temperature variation is less than ±2 °C.

5)Factory-set pulse repetition rate is fixed at max repetition rate shown in the table. Higher repetition rates are available, please inquire for more details.

6)Full angle measured at the 1/e² level.

7)Beam diameter is measured 20 cm from laser output at the 1/e² level.

8)In respect to Q-switch triggering edge of pulse.

9)Harmonics generator module is stand-alone unit optimized for specified output wavelength. Inquire for details if multiple wavelength output is needed.

10)External Motorized Variable Attenuator. Please inquire for attenuator built-in into harmonics generator module.

11)Fiber coupler is built-in into harmonics generator module. Please inquire for details.

12)For fiber core diameter of 550 μm. Smaller core fibers are available, inquire for specifications.

13)Laser can be powered from appropriate 28 V DC power source. Please inquire for details.

Tab 3

Tab 3 Inhalt

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
 Q1 100
Beschreibung 1
Q1-100 diode pumped air-cooled Q-switched laser
Bild 2
 Dimensions Quantas Q1 100
Beschreibung 2
Q1-100 dimensions laser head
Bild 3
 
Beschreibung 3
 
Bild 4
 
Beschreibung 4
 
Bild 5
 
Beschreibung 5
 
Bild 6
 
Beschreibung 6
 
Bild 7
 
Beschreibung 7
 
Bild 8
 
Beschreibung 8
 
Bild 9
 
Beschreibung 9
 
Bild 10
 
Beschreibung 10