Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] 

Q1-1053 Serie

Q1-1053 - Serie, gütegeschalteter Nd:YLF Laser, Dioden-gepumpt

Q1 1053

The new Quantas Q1-series produces pulses with up to 25mJ at repetition rates of 50/100Hz. With <10ns pulses the fully air cooled laser covers a wide range of applications such as: induced breakdown spectroscopy libs lcd repair semiconductor failure analysis ablation remote sensing and many others


Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Bilder
Tab 1


  • Up to 40mJ pulse energy at 1053nm
  • Air cooled - no liquids
  • Short pulse duration < 8ns
  • Variable pulse repetition rate, SS - 10Hz
  • Built-in sync pulse generator for triggering of user equipment
  • Remote control via built-in Ethernet or Wi-Fi interface
  • Optional 2nd, 3rd, 4th or 5th harmonic generators
  • Optional attenuator for fundamental wavelength.
  • Optional fiber coupled output
  • Guaranteed > 1 Gshot lifetime


  • Light Induced Breakdown Spectroscopy (LIBS)
  • Laser ablation
  • Time-of-Flight Spectroscopy (TOFS)
  • Light Induced Fluorescence (LIF) Spectroscopy
  • Flash photolysis
  • Matrix Assisted Laser Desorption/Ionization (MALDI)
  • Pulsed Light Deposition (PLD)
  • Remote sensing
  • TFT-LCD repair
  • Particle Image Velocimetry (PIV)

Quantas Q1-1053 series is diode pumped, air-cooled, Q-switched laser designed for wide range of applications that require low pulse repetition rate and high peak power pulses (Q1D model produces ~6 MW peak power). Typical applications are Light Induced Breakdown Spectroscopy (LIBS), Light Induced Fluorescence Spectroscopy (LIF), laser ablation and remote sensing. Less than 8 ns pulse duration allows efficient fundamental wavelength conversion to higher harmonics with shortest wavelength available of 211 nm. Wavelength extensions into infrared range are available by request. Quantas is completely air cooled laser due its excellent wall-plug efficiency. Liquids are not used for heat transfer, as result, maintenance associated with regular replacements of cooling liquid and/or cleaning of cooling system is not required. Low jitter triggering pulses for user equipment are available with up to 450 μs lead in internal triggering mode. If required, laser pulsing can be externally triggered from delay generator, allowing operation in single-shot or variable pulse repetition modes. Laser controller has Ethernet interface for convenient monitoring and control from personal computer.

Tab 2
Specifications 1)

ModelQuantas-1053 Q1BQuantas-1053 Q1CQuantas-1053 Q1D
Wavelength 1053 nm2)
Pulse energy 10 mJ 20 mJ 40 mJ
Typical pulse duration < 8 ns3)
Pulse to pulse energy stability4) < 0.5 % RMS 
Power drift ± 3.0 %5)
Pulse repetition rate single shot - 10 Hz6)
Beam profile nearly TEM00 bell-shaped, > 75 % fit to Gaussian
Beam divergence7) < 2 mrad < 1.5 mrad
Polarization linear, horizontal
Typical beam diameter8) 1.5 mm 2 mm 2.5 mm
Jitter < 1 ns RMS 9)
Optional Harmonics Generator Module10)
527 nm 5 mJ 10 mJ 20 mJ
351 nm 3 mJ 6 mJ 12 mJ
263 nm 1.5 mJ 3 mJ 6 mJ
211 nm 0.5 mJ 1 mJ 2 mJ
Optional Attenuator11)
Wavelength 1053 nm, 527 nm, 351 nm
Attenuation range 5-95 %
Optional Fiber Coupled Output12)
Wavelength 1053 nm or 527 nm
Max output pulse energy up to 7 mJ13)
Laser head (WxLxH) 113 x 230 x 112 mm3
Harmonics generator module (WxLxH) 113 x 242 x 112 mm3
Controller unit (WxLxH) 85 x 165 x 50 mm3
Power adapter, typical (WxLxH) 50 x 125 x 32 mm3
Operating Requirements
Cooling requirements air cooled
Ambient temperature 15 - 30 °C
Relative humidity 10 - 80 % (non-condensing)
Mains voltage 90 - 230 V AC, single phase, 47 - 63 Hz14)
Power consumption < 30 W

1)Due to continuous improvements all specifications are subject to change. Unless stated otherwise all specifications are measured at 1053 nm and 10 Hz pulse repetition rate.

2)1064 nm output wavelength models are available. See Q1-1064 model leaflet.

3)FWHM level at 1053 nm. Shorter pulse duration is available by request. Please inquire for specifications.

4)Averaged from 500 pulses.

5)Over 8 hour period after 20 minutes of warm-up when ambient temperature variation is less than ±2 °C.

6)Factory-set pulse repetition rate is fixed at 10 Hz. Single shot or variable pulse repetition rate is possible when laser is externally triggered. Higher repetition rates are available, please nquire for details.

7)Full angle measured at 1/e² level.

8)Beam diameter is measured 20 cm from laser output at 1/e² level.

9)In respect to Q-switch triggering edge of pulse.

10)Harmonics generator module is stand-alone unit optimized for specified output wavelength. Inquire for details if multiple wavelength output is needed.

11)External Motorized Variable Attenuator. Please inquire for attenuator build-in into harmonics generator module.

12)Fiber coupler is build-in into harmonics generator module. Please inquire for details.

13)For fiber core diameter of 550 μm. Smaller or larger core fibers are available, please inquire for specifications.

14)Laser can be powered from appropriate 12 V DC power source. Please inquire for details

Tab 3

Tab 3 Inhalt

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
 Q1 1053
Beschreibung 1
Q1-1053 diode pumped air-cooled Q-switched laser
Bild 2
 Q1 1053 dimensions
Beschreibung 2
Q1-1053 dimensions laser head
Bild 3
 Q1 1053 Harmonics generator module dimensions
Beschreibung 3
 Q1-1053 Harmonics generator module dimensions
Bild 4
Beschreibung 4
Bild 5
Beschreibung 5
Bild 6
Beschreibung 6
Bild 7
Beschreibung 7
Bild 8
Beschreibung 8
Bild 9
Beschreibung 9
Bild 10
Beschreibung 10