Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] 

PGx03 - Serie, abstimmbar

PGx03 - Serie, abstimmbare hochrepetierende OPG Systeme


Die OPG´s der PGx03 Serie sind für den Betrieb mit hoher Repetitionsrate (1kHz) ausgelegt und für Pumplaser der PL2210A Serie optimiert. Aufgrund des einzigartig breiten Abstimmbereichs von 210nm bis 16µm, der kurzen Pulsdauer (15-20ps) und der schmalen Linienbreite (bis <6cm-1) sind diese OPGs eine ausgezeichnete Wahl für viele spektroskopische Anwendungen.


Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Bilder
Tab 1


  • Picosecond pulses at 1 kHz pulse repetition rate
  • Hands-free wavelength tuning
  • Tuning range from 210 nm to 16000 nm
  • Narrow linewidth <6 cm-1
  • Low divergence <2 mrad
  • Remote control via keypad
  • PC control using USB (RS232 is optional) and LabVIEW™ drivers


  • Time resolved pump-probe spectroscopy
  • Laser-induced fluorescence
  • Infrared spectroscopy
  • Nonlinear spectroscopy: vibrational-SFG, surface-SH, CARS, Z-scan
  • Other laser spectroscopy applications

PGx03 series Optical Parametric Generators (OPG) are designed to be pumped by 1 kHz mode-locked lasers with 1 W average power. An excellent choice is the PL2210A series mode‑locked picosecond laser from EKSPLA.

The optical design is optimized to produce low divergence beams with moderate linewidth (typically 12 cm⁻¹) at approximately 20 ps pulse duration. Due to the unique broad tunability range from 210 to 16000 nm these devices are an excellent choice for many spectroscopic applications.

Upon request the optical layout can be easily modified for pumping by other mode-locked lasers with high pulse energy or longer pulse duration. Three models designed for pumping by up to the 3rd harmonic of Nd:YAG laser are available.

PG403 model has a tuning range from 410 to 2300 nm and is optimized for providing the highest pulse energy in the visible part of the spectrum. When combined with an optional Second Harmonic Generator (SHG), it offers the widest possible tuning range – from 210 to 2300 nm.

PG503 model has a tuning range from 700 to 2300 nm and the highest pulse energy in the near-IR spectral range. PG503 is a cost-effective alternative to the narrow-band mode-locked Ti:S lasers.

PG703 model is targeted for infrared spectroscopy applications. The tuning range is from 1400 to 4450 nm and with an optional Difference Frequency Generator (DFG) stage it can be extended to 16000 nm.

Microprocessor based control system -provides automatic positioning of relevant components for hands free operation. Nonlinear crystals, diffraction grating and filters are rotated by ultra-precise stepper motors in the microstepping mode, with excellent reproducibility. Precise nonlinear crystal temperature stabilization ensures long-term stability of generated wavelength and - output power.

For customer convenience the system can be controlled using a user-friendly remote control pad or through USB interface (RS232 is optional) from a personal computer (PC) using supplied LabVIEW™ drivers.

Available standard models are summarized in a specifications sheet below. Please inquire for custom-built versions.

Tab 2
Specifications 1)

OPG specifications
Output wavelength tuning range
SH - 210-410 nm - - -
Signal 410-709 nm 700-1000 nm 1550-2020 nm 1550-2020nm
Idler 710-2300 nm 1150-2200 nm 2250-3350 nm 2250-3350 nm
DFG - - - - 3350-16000 nm
Output pulse energy 2)
SH 3) - 10 µJ - - -
Signal 50 µJ 70 µJ 60 µJ
Idler 4) 15 µJ 25 µJ 20 µJ
DFG 5) - - - - 6 µJ
Pulse repetition rate 1000 Hz
Linewidth < 12 cm-1 < 12 cm-1 < 6 cm-1
Typical pulse duration 6) 15 ps 20 ps 20 ps
Scanning step
SH - 0.05 nm - - -
Signal 0.1 nm
Idler 1 nm
DFG - - - - 1 nm
Typical beam size 7) ~ 3 mm
Beam divergence 8) < 2 mrad
Beam polarization 9)
SH - vertical - - -
Signal horizontal
Idler vertical vertical horizontal vertical
DFG - - - - vertical
Pump laser requirements
Min pump energy10)
at 1064 nm - - 0.9 mJ
at 532 nm - 0.45 mJ -
at 355 nm 0.3 mJ - -
Pulse duration 11) 10-30 ps
Beam polarization at pump wavelength vertical horizontal horizontal
Beam size 11) 2-3 mm
Beam divergence < 1 mrad
Beam profile homogeneous, without hot spots, Gaussian fit > 90 %
Recommended pump source PL2210A-TH PL2210A-TH PL2210A-SH PL2210A PL2210A
Physical characteristics
Size (WxLxH) 456x605x273 mm 456x1026x273 mm 456x605x273 mm 456x605x273 mm 456x1026x273 mm
Operating requirements
Room temperature 15-30 °C
Power requirements 100-240 V single phase, 47-63 Hz
Power consumption < 120 W

1) Due to continuous improvement, all specifications are subject to change without notice. For latest product information please visit EKSPLA. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 450 nm for PG403 units, 800 nm for PG503 units, and 1620 nm for PG703 units.
2) Pulse energies are specified at selected wavelengths. See typical tuning curves for pulse energies at other wavelengths.
3) Measured at 250 nm.
4) Measured at 1000 nm for PG40x units, 1620 nm for PG503 and 3000 nm for PG703 units.
5) Measured at 5000 nm.
6) Estimated assuming 30 ps at 1064 nm pump pulse. Pulse duration varies depending on wavelength and pump energy.
7) Beam diameter at the 1/e² level. FWHM point. Can vary depending on the pump pulse energy.
8) Full angle measured at the FWHM level.
9) Separate output ports for SH, signal, idler and DFG ranges.
10) Max pump energy is limited by available non‑linear crystal sizes
11) Should be specified while ordering if non‑Ekspla pump laser is used.


Tab 3

Tab 3 Inhalt

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
Beschreibung 1
Typical outside view of PGX03 series picosecond OPG 
Bild 2
Beschreibung 2
Typical PG403-SH model tuning curve. Pump energy - 0.3 mJ at 355 nm. 
Bild 3
Beschreibung 3
Typical PG503 model tuning curve. Pump energy - 0.45 mJ at 532 nm. 
Bild 4
Beschreibung 4
Typical PG703-DFG model tuning curve. Pump energy - 0.9 mJ at 1064 nm 
Bild 5
Beschreibung 5
Typical PG703 model tuning curve. Pump energy - 0.9 mJ at 1064 nm. 
Bild 6
Beschreibung 6
Outline drawings of PGX03 series kHz repetition rate picosecond OPG 
Bild 7
Beschreibung 7
Bild 8
Beschreibung 8
Bild 9
Beschreibung 9
Bild 10
Beschreibung 10