Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] 

SL212 - Serie, hohe Energie

SL212-Serie SBS komprimiert, Nd:YAG


Im Gegensatz zu herkömmlichen modengekoppelten Pikosekundenlasern wird in der SL212-Serie zur Erzeugung der kurzen Pulse das backward-stimulated Brillouin scattering (SBS) Verfahren eingesetzt. Dadurch können Pulse mit einer Länge von 150ps bei einer maximalen Energie von bis zu 250mJ generiert werden. Das System eignet sich für die OEM-Integration und findet u.a. Anwendungen in den Bereichen: Tattooentfernung, Materialabtrag und Fernerkundung.


Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Bilder
Tab 1


  • Diode pumped Q-switched oscillator
  • Advanced SBS compression produces pulses of less than 150 ps duration
  • Flashlamp pumped power amplifier for up to 250 mJ pulse energy at 1064 nm
  • Excellent pre-pulse contrast ratio
  • Thermo stabilized harmonic generator options
  • PC control and LabView™ drivers
  • Remote control via keypad


  • Tattoo removal
  • Material ablation and deposition
  • Remote laser sensing
  • Satellite ranging

SL212 laser is excellent solution for applications, where high energy picosecond pulses are needed. In contrary to conventional mode-locked lasers the SL212 series lasers use different method of generating short pulses based on backward-stimulated Brillouin scattering (SBS). Diode pumped passive Q-switched single longitudinal mode (SLM) nanosecond generator is the heart of the system. It provides nanosecond optical pulse that is later compressed during SBS in a special cell.

Pulse compressor consists of optical guiding system and SBS-cell. SBS cell is designed for safe and longlife maintenance free operation. A linearly polarized light pulse from master oscillator passes through QWP and is focused into SBS-cell by lens. Focusing is arranged in the way to compress the pulse via SBS process. The backscattered Stokes pulse, as its phase is reversed, strictly repeats the path of pump pulse in the opposite direction and with a reversal divergence. The compressed pulse is guided into the amplification stage using polarizer and mirror. After SBS compression, pulse is directed to multi-pass flashlamp pumped power amplifier system, providing high-energy pulses. SL212 model lasers use multi-pass amplifier system which is based on laser chamber containing Nd:YAG rod pumped by two flash lamps. For smooth obtaining output beam profile pre-amplifier and double-pass amplifier layout is used in SL212 series lasers. Power amplifier includes optical components arranging passes through the active element. Aperture is employed to prevent the returning depolarized radiation from getting back into the amplifier.

Thermocontrolled harmonics’ generators, based on angle-tuned non-linear crystals and harmonic separation optics are available as standard options. Fundamental and second harmonics are separated and has a single output port. Harmonics’ crystals mounted in temperature‑controlled heaters. Pulse compression during SBS, is a simple and cost effective way for generating high power picosecond pulses. In addition to it, SBS compression allows generation of pulses with exceptional pulse duration range: from 150 ps up to 1000 ps. A power supply and water/water type cooling units, placed in standard 19” rack, requires a little space under the user’s optical table.

Tab 2
Specifications 1)

Max. pulse energy
at 1064 nm 250 mJ
at 532 nm 150 mJ
Pulse energy stability (Std. Dev) 2)
at 1064 nm < 3 %
at 532 nm < 5 %
Pulse duration at 1064 nm (FWHM) 3) <150 ps
Repetition rate 10 Hz
Polarization ratio at 1064 nm > 1:100
Optical pulse jitter 4) 0.5 ns
Beam profile close to Hat Top
Beam divergence 5) < 0.5 mrad
Beam pointing stability  < 50 µrad
Beam height 107 mm
Beam diameter 6) ~10 mm
Contrast ratio at 1064 nm 105:1
Physical characteristics
Laser head size (W x L x H) 370 x 270 x 1000 mm
Electric cabinet size (W x L x H) 500 x 525 x 590 mm
Umbilical length 2.5 m
Operating requirements
Water consumption (max 20 °C) 7) < 10 l/min
Room temperature 18-24 °C
Relative humidity 20-80 % (non-condensing)
Power requirements ~220 V AC, single phase, 50/60 Hz
Power consumption < 2.5 kVA

1) Due to continuous improvement, all specifications are subject to change without notice. For latest product information please visit EKSPLA. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise all specifications are measured at 1064 nm.

2) Averaged from 500 pulses.

3) Variable pulse duration up to 1500 ps is available, please inquire for detailed specs.

4) RMS value measured from 500 pulses.

5) Full angle measured at 1/e² level at 1064 nm.

6) Beam diameter is measured at 1064 nm at 1/e² level.

7) Air-water heat exchanger can be supplied as an option.

Tab 3

Tab 3 Inhalt

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
Beschreibung 1
SL212 series SBS Compressed Q-switched Nd:YAG Lasers for OEM
Bild 2
Beschreibung 2
Bild 3
Beschreibung 3
Bild 4
Beschreibung 4
Bild 5
Beschreibung 5
Bild 6
Beschreibung 6
Bild 7
Beschreibung 7
Bild 8
Beschreibung 8
Bild 9
Beschreibung 9
Bild 10
Beschreibung 10