Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] topag.de 

PL2250 - Serie, DPSS

541
PL2250 - Serie, DPSS Nd:YAG Laser

PL2250

Das Modell PL2250 besitzt einen diodengepumpten Oszillator in Kombination mit einem diodengepumpten regenerativen Verstärker. Dieser Aufbau vermeidet thermische Linseneffekte und erlaubt den Betrieb des Lasers bei variablen Repetitionsraten. Der PL2250 verbindet exzellente Strahlqualität und hohe Puls-zu-Pulsstabilität mit Wartungsfreiheit und minimalen Betriebskosten. Der Laser liefert 1mJ bei 0-50Hz und 30ps Pulsbreite.

Status-mail-unread-icon

Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Optionen
  • Bilder
Tab 1

Features

  • Hermetically sealed DPSS master oscillator
  • Diode pumped regenerative amplifier
  • 30 ps pulse duration (20 ps optional)
  • Excellent pulse duration stability
  • Up to 50 Hz repetition rate
  • Streak camera triggering pulse with <10 ps jitter
  • Excellent beam pointing stability
  • Thermo stabilized second, third or fourth harmonic generator options
  • PC control via USB and LabVIEW™ drivers (RS232 control is optional)
  • Remote control via keypad

Applications

  • Time resolved spectroscopy
  • SFG/SHG spectroscopy
  • Nonlinear spectroscopy
  • OPG pumping
  • Remote laser sensing
  • Satellite ranging
  • Other spectroscopic and nonlinear optics experiments

PL2250 series lasers set a new standard in high pulse energy picosecond lasers. Their innovative and cost-effective design improves laser reliability and reduces running and maintenance costs.

Innovative design

The heart of the system is a diode pumped solid state (DPSS) master oscillator placed in a hermetically sealed monolithic block. The flashlamp pumped regenerative amplifier is replaced by an innovative diode pumped regenerative amplifier. Diode pumping results in negligible thermal lensing, which allows operation of the regenerative amplifier at variable repetition rates, as well as improved long-term stability and maintenance-free operation.

The optimized multiple-pass power amplifier is flashlamp pumped and is optimized for efficient amplification of pulse while maintaining a near Gaussian beam profile and low wavefront distortion. The output pulse energy can be adjusted in approximately 1% steps, at the same time as pulse-to-pulse energy stability remains less than 0.8% rms at 1064 nm. Angle-tuned KD*P and KDP crystals mounted in thermostabilised ovens are used for second, third and fourth harmonic generation. Harmonics separators ensure the high spectral purity of each harmonic directed to different output ports.

Built-in energy monitors continuously monitor output pulse energy. Data from the energy monitor can be seen on the remote keypad or PC monitor. The laser provides several triggering pulses for synchronization of the customer‘s equipment. The lead or delay of the triggering pulse can be adjusted in 0.25 ns steps from the control pad or PC. Up to 1000 μs lead of triggering pulse is available as a pretrigger option.

Precise pulse energy control, excellent short-term and long-term stability, and up to 50 Hz repetition rate makes PL2250 series lasers an excellent choice for many demanding scientific applications.

Simple and convenient laser control

For customer convenience the laser can be controlled from a user-friendly remote control pad or USB interface. The remote pad allows easy control of all parameters and features a backlit display that is easy to read even while wearing laser safety eyewear. Alternatively, the laser can be controlled from a personal computer with supplied software for a Windows™ operating system. LabVIEW™ drivers are supplied as well.

Tab 2
Model PL2250 having DPSS oscillator and regenerative amplfier.
All others systems of PL2250 - series having additional flash-lamp pumped power amplifier.

Specifications 1)

 ModelPL2250PL2251PL2251APL2251BPL2251C 
Pulse energy
   At 1064 nm  1 mJ  30 mJ  50 mJ   80 mJ 2)  100 mJ
   At   532 nm 3)  0.45 mJ  15 mJ  25 mJ  40 mJ  50 mJ
   At   355 nm 4)  0.3 mJ  10 mJ  15 mJ  24 mJ  30 mJ
   At   266 nm 5)  0.15 mJ  3 mJ  7 mJ  10 mJ  12 mJ
   At   213 nm 6) na inquire inquire inquire inquire
 Pulse energy stability, (Std. Dev.) 7) 
 At 1064 nm   < 0.2 %  < 0.8 %
  At   532 nm   < 0.4 %  <1.0 %
 At   355 nm   < 0.5 %  < 1.1 %
 At   266 nm   < 0.5 %  < 1.2 %
Pulse duration (FWHM) 8)  30 ps ± 10 %
Pulse duration stability 9)   ± 1.0 %
Repetition rate  0-50 Hz 50, 20 or 10 Hz 50, 20 or 10 Hz 20 or 10 Hz 10 Hz
Polarization linear, vertical, > 99 %
Pre-pulse contrast  > 200:1 (peak-to-peak in respect to residual pulses)
Optical pulse jitter  internal/external
 Internal triggering regime 10) <50 ps (StdDev) in respect to TRIG1 OUT pulse
 External triggering regime 11) ~3 ns (StdDev) in respect to SYNC IN pulse
SYNC OUT pulse jitter 10)  - 500...50 ns
TRIG1 OUT pulse delay 12)  - 500...50 ns
Beam divergence 13)  < 1.5 mrad < 0.5 mrad < 0.5 mrad < 0.5 mrad < 0.5 mrad
Beam pointing stability 14)  ≤ 10 µrad ≤ 30 µrad
Typical beam diameter 15)  ~2.5 mm ~ 8 mm ~ 8 mm ~10 mm ~12 mm
Typical warm-up time 5 min 30 min

Physical characteristics

ModelPL2250PL2251PL2251APL2251BPL2251C
Laser head size (W x L x H), mm 456x1031x249 mm ± 3 mm 456×1233×249 mm ±3 mm
(for PL2251A, B with harmonics and c models)
456×1031×249 mm ±3 mm
(for PL2251A, B models without harmonics)
Electric cabinet size (W x L x H), mm 12 VDC power adapter, 85x170x41 mm ± 3 mm 550×600×550 mm ±3 mm (19′′ standard, MR-9)
Umbilical length 2.5 m

Operating requirements

ModelPL2250PL2251PL2251APL2251BPL2251C
Water consumption (max 20 °C ) air cooled water cooled, water consumption (max. 20 °c), <8 l/min, 2 bar
Room temperature 22 ± 2 °C
Relative humidity (non-condensing) 20-80 %
Power requirements 16) 110-240 VAC, 50/60 Hz single phase, 200 – 240 v ac, 16 a, 50/60 Hz
Power 17) < 0.15 kVA < 1.5 kVA < 1.5 kVA < 2 kVA < 2.5 kVA

1) Due to continuous improvement, all speciications are subject to change without notice. For latest product information please visit EKSPLA. Parameters marked typical are not speciications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all speciications are measured at 1064 nm.

2) PL2251A-50 has 40 mJ at 1064 nm, PL2251B-20 has 70 mJ at 1064 nm output energy. Inquire for these energies at other wavelengths.

3) For -SH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

4) For -TH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

5) For -FH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

6) For PL2250 series laser with custom -FiH option.

7) Averaged from pulses, emitted during 30 sec time interval.

8) FWHM. Inquire for optional pulse durations in 20 – 90 ps range. Pulse energy speciications may differ from indicated here.

9) Measured over 1 hour period when ambient temperature variation is less than ±1 °C.

10) With respect to TRIG1 OUT pulse. <10 ps jitter is provided with PRETRIG option

11) With respect to SYNC IN pulse.

12) TRIG1 OUT lead or delay can be adjusted with 0.25 ns steps in speciied range.

13) Average of X- and Y-plane full angle divergence values measured at the 1/e² level at 1064 nm.

14) Beam pointing stability is evaluated from luctuations of beam centroid position in the far ield.

15) Beam diameter is measured at 1064 nm at the 1/e² point.

16) Three phase 208 or 380 VAC mains are required for 50 Hz versions.

17) For 10 Hz version.

 

 

Tab 3

Pretriger for streak camera trigering optionPL2250 series lasers have build-in low-jitter delay generator for streak camera triggering. Provides low jitter < 10 ps rms triggering pulse

Option P20 provides 20 ps ± 10 % output pulse duration. Pulse energies are 30 % lower in comparison to the 30 ps pulse duration version. Linewidth < 2 cm^-1 at 1064 nm. See table below for pulse energy specifictaions:

ModelPL2251-10PL2251A-10PL2251B-10PL2251C-10
1064 nm 20 mJ 35 mJ 60 mJ 80 mJ
532 nm 10 mJ 17 mJ 30 mJ 40 mJ
355 nm 7 mJ 12 mJ 18 mJ 24 mJ
266 nm 3 mJ 5 mJ 8 mJ 10 mJ

Option P80 provides 80 ps ± 10 % output pulse duration. Pulse energy specifications as below:

ModelPL2250PL2251PL2251APL2251BPL2251C
Pulse energy at 1064 nm 1.5 mJ 60 mJ 100 mJ 160 mJ 200 mJ
Pulse duration (FWHM)* < 80 ps

 * Inquire for other pulse durations in 20-150 ps range.

Option PLL allows locking the master oscillator pulse train repetition rate to an external RF generator, enabling precise external triggering with low jitter. Inquire for more information.

 

 

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
 pl2250-series-high-energy-picosecond-mode-locked-ndyag-lasers2
Beschreibung 1
PL2250 series high energy picosecond mode-locked Nd:YAG lasers 
Bild 2
 pl2250-series-high-energy-picosecond-mode-locked-ndyag-lasers3
Beschreibung 2
PL2250 series high energy picosecond mode-locked Nd:YAG laser output beam profile 
Bild 3
 
Beschreibung 3
 
Bild 4
 
Beschreibung 4
 
Bild 5
 
Beschreibung 5
 
Bild 6
 
Beschreibung 6
 
Bild 7
 
Beschreibung 7
 
Bild 8
 
Beschreibung 8
 
Bild 9
 
Beschreibung 9
 
Bild 10
 
Beschreibung 10