Palm Beach atlantic Apotheke cialis generika Wie können man apps auf android-Tablet herunterladen

TOPAG Lasertechnik GmbH
Nieder-Ramstädter Str. 247
64285 Darmstadt
Telefon: +49 6151 4259 78
Telefax: +49 6151 4259 88 
E- mail: info [at] topag.de 

SL330 - Serie, hohe Energie

546
SL330 - Serie, Hochleistungs SBS-komprimierte Nd:YAG Laser

SL330

Die Pikosekunden-Laser der SL-330 Serie besitzen einen Single Longitudinal Mode Master-Oszillator (SLM), dessen Ausgangspulse in einem lampengepumpten Leistungs-Verstärker und mit Hilfe von SBS Pulskompression (Stimulated Brillouin Scattering) auf intensive Pikosekundenpulse (bis 500mJ, 150-170ps) komprimiert werden. Diese Laser sind ideal für Anwendungen in Plasmaforschung, Ablation, Absorptionsspektroskopie.

Status-mail-unread-icon

Bezeichnungen der Tabs

  • Beschreibung
  • Spezifikationen
  • Bilder
Tab 1

Features

  • Innovative and cost-efficient design
  • Up to 500 mJ per pulse a 1064 nm
  • 150 ps pulse duration
  • Self seeding SLM master oscillator
  • More than 10⁵ : 1 pre-pulse contrast ratio
  • Low jitter external triggering
  • Versatile synchronization possibilities
  • Variable pulse duration option
  • LabVIEW™ drivers for convenient control from PC via RS232 port
  • Remote control via keypad
  • Compact laser head and power supply cabinet

Applications

  • Plasma research
  • Material ablation and deposition
  • Holography
  • Absorption spectroscopy of laser induced plasmas
  • Satellite ranging
  • EUV light source development for photolithography
  • OPCPA pumping

SL 300 series lasers are an excellent solution for applications that require high energy picosecond pulses.

Pulse compression during backward‑stimulated Brillouin scattering (SBS), used in EKSPLA SL300 series lasers, is a simple and cost‑efficient way to generate picosecond pulses, with the unique capability of producing pulses with tunable duration.

An electro-optically Q-switched Single Longitudinal Mode (SLM) nanosecond generator is the heart of the system. Instead of external narrow linewidth diode lasers, the selective properties of Fabry-Perrot etalon, and a laser cavity are used to produce SLM pulses with a smooth temporal envelope. In scientific literature this method of generating SLM pulses is known as a selfseeding technique.

Pulse compression is done in a SBS‑cell. Depending on the geometry of interaction, a pulse with duration in the 170 – 1500 ps range can be produced. Pulse duration can be tuned in discrete steps when a variable pulse duration option (-VPx) is installed.

After SBS compression, the pulse is directed to a multi-pass power amplifier system for amplification to up to 500 mJ energy. Temperature controlled harmonics generators, based on angle-tuned KD*P and KDP crystals and harmonic separation optics, are available as standard options. Each wavelength has a separate output port.

A power supply and cooling units are placed in a standard 19” rack that requires little space under an optical table.

The very low jitter of the optical pulse relative to the Q-switch triggering pulse ensures reliable synchronization of the laser with external equipment.

For customer convenience the laser can be controlled from a user-friendly remote control pad or RS232 interface.

The remote pad allows easy control of all laser parameters and features a backlit display that is easy to read even when wearing laser safety eyewear. Alternatively, the laser can be controlled from a personal computer with supplied software for a Windows™ operating system. LabView™ drivers are supplied as well.

Tab 2
Specifications 1)

ModelSL330SL332SL333SL334
Max. pulse energy
 at 1064 nm 30 mJ 150 mJ 250 mJ 500 mJ
 at 532 nm2) 12 mJ 70 mJ 120 mJ 240 mJ
 at 355 nm3) 7 mJ 40 mJ 80 mJ 140 mJ
 at 266 nm4) 4 mJ 25 mJ 40 mJ 80 mJ
 at 213 nm5) 2 mJ 10 mJ 15 mJ 25 mJ
Pulse energy stability (Std. Dev), % 6)
 at 1064 nm 6 % 4 %
at 532 nm 8 % 7 %
at 355 nm 10 % 9 %
at 266 nm 13 % 12 %
at 213 nm 15 % 15 %
Pulse duration at 1064 nm (FWHM) 7) 150 ± 20 ps 170 ± 20 ps
Pulse duration stability at 1064 nm 8) 10 % (Std. Dev.)
Repetition rate 9) 10 or 50 Hz 10 Hz 5 Hz
Linewidth ≤ 0.1 cm-1
Polarization linear,>50:1
Optical pulse jitter10) 0.5 ns
Beam profile11) Hat-Top, >70% fit to Gaussian
Beam pointing stability at 1064 nm12) 50 µrad
Beam divergence 13) <0.5 mrad
Beam height 170 ± 5 mm
Pre-pulse contrast ratio 105:1
Beam diameter14) ~6 mm ~8 mm ~10 mm ~12 mm
Physical characteristics
Laser head size (WxLxH) 255x790x240 mm 305x990x260 mm
Electric cabinet size (WxLxH) 550x600x530 mm 550x600x850 mm
Umbilical length 2.5 m
Operating requirements
Water consumption (max 20 °C) < 10 l/min
Room temperature 18-27 °C
Relative humidity (non-condensing) 10-80 %
Power requirements 15) 208 or 230 V AC, single phase, 50-60 Hz 208 or 380 V AC, three phase, 50-60 Hz
Power consumption 16) <1.5 kVA <2.5 kVA <3.5 kVA <3.5 kVA

1) Due to continuous improvement, all specifications are subject to change without notice. For latest product information please visit EKSPLA. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm.

2) For -SH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

3) For -TH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

4) For -FH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

5) For -FiH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.

6) Averaged from 300 pulses.

7) Variable pulse duration options are available with 170 – 500 ps or 500 – 1000 ns tuning range.

8) Measured from 300 shots using 40 Gs/s oscilloscope and photodetector with 50 ps rise time.

9) Inquire for up to 50 Hz custom pulse repetition rates.

10) In external triggering mode with two separate triggering pulses for flashlamps and Q-switch. Low jitter sync pulse is available for user equipment triggering.

11) Improved Gaussian fit profile is available on request.

12) RMS value measured from 300 shots.

13) Full angle measured at the 1/e² point at 1064 nm.

14) Beam diameter is measured at 1064 nm at the 1/e² point.

15) Three phase 208 or 380 V AC mains are required for 20 or 50 Hz versions.

16) For 5 or 10 Hz pulse repetition rate.

 

 

Tab 3

Tab 3 Inhalt

Tab 4

Tab 4 Inhalt

Tab 5
Bild 1
 picosecond-sbs-compressed-high-energy-ndyag-lasers-sl330-series1
Beschreibung 1
Picosecond SBS compressed high energy Nd:YAG lasers SL330 series 
Bild 2
 picosecond-sbs-compressed-high-energy-ndyag-lasers-sl330-series2
Beschreibung 2
SL332, SL333 and SL334 model picosecond high energy Nd:YAG lasers head outline drawing
Bild 3
 picosecond-high-energy-ndyag-lasers-sl330-series1
Beschreibung 3
SL330 series laser used as a flash in high speed photography to illuminate wires as they explode. Courtesy of Dr. Randy Montoya, Sandia National Laboratories, USA 
Bild 4
 
Beschreibung 4
 
Bild 5
 
Beschreibung 5
 
Bild 6
 
Beschreibung 6
 
Bild 7
 
Beschreibung 7
 
Bild 8
 
Beschreibung 8
 
Bild 9
 
Beschreibung 9
 
Bild 10
 
Beschreibung 10